Stone floor is the main material essential for modern decoration, especially natural stone is favored by the majority of consumers for its natural and beautiful characteristics. But almost all of the natural stone no matter how careful use, after a period of time will have different degrees of scratch, and slowly lost luster, greatly affected the original appearance of the stone surface. Replacement or renovation costs a lot, if the ground damage is not particularly serious should not take the above approach.

Wax as the first generation of stone care technology, is still widely used. This technology relies on water-swellable low molecular plastic materials to form a covering layer on the stone surface to protect the substrate. However, the hardness bottom is easy to change color, so it is necessary to polish and replenish wax frequently, which consumes huge resources. Moreover, the black waxing pad containing alloy sand is used in each waxing process, which seriously damages the surface of the stone, while the waxing water with high solvent and strong alkalinity penetrates into the stone to form cracks. As new technologies develop first-generation technologies will be used less.

Marble, granite and other crystallization operation procedures

Material: stone high-gloss mirror reconstruction powder

Function: It is applied to the marble mirror crystal hard treatment to protect the stone surface from general scratches, keep bright mirror, waterproof and anti-corrosion, and is easier to care than waxing.

This product for wet operation, in the shortest possible time to recreate the stone high gloss crystal surface, used to deal with wear and other reasons caused by the loss of luster of the stone surface.

Features:

1) It will not produce scratches on the stone surface caused by steel wool.

2) Will not discolor the stone surface or leave yellow rust

3) The stone surface is as bright as water, with a sense of hierarchy

4) Low cost, time saving and labor saving

5) with the prevention of stains in-depth stone inner layer, enhance anti-wear, scratch and other effects

Operation:

1) Use the washing machine to thoroughly clean the surface of the stone

2) Use pure water to make the crystal powder into a paste and apply it to the grinding pad.

3) Use the 175 r/min-clock floor wiper to start grinding with a load of 45KG, and keep the ground wet during operation.

4) When the high-gloss crystal surface is formed on the surface of the Li Shi, absorb the residual paste on the ground with a water suction machine.

5) over water dry.

6) polishing with a polishing pad, so that the ground is completely dry, bright as a mirror. Comparison of crystallization and waxing

1. steps:

1. Waxing ① Wash the floor and blow dry ② Blow dry the bottom wax (2 times) ③ Blow dry the surface wax (2 times) ④ Polishing with a high-speed polishing machine;

2. Crystallization ① Washing and drying ② It can be used with a single wiping machine.

2. texture:

1. Waxing is soft;

2. Hard crystallization

3. brightness:

1, waxing in general;

2. The crystal is as bright as a mirror

4. hydrophilicity

Waxing absorbs moisture, easy to soften and roll up, strong water resistance, not soft and unable to roll up

Number of 5. operators

1, waxing 3-4 people;

2, crystal 1-2 people.

Daily maintenance of 6.

1, waxing often polishing maintenance;

2, crystallization does not require frequent maintenance.

Local 7. damage

1, waxing all waxing;

2. It can be repaired locally.

8. operation requirements

1. Waxing and sealing operation;

2, crystallization sealing operation. 9. secondary operation

1. Use waxing water to remove the old wax;

2, crystallization, any time does not affect the operation, finished crystallization can walk immediately.

10. retention period

1, waxing 2-4 months;

2. Crystallization for 3-12 months.

11. Use of Machines

1, waxing washing machine, washing machine, blowing machine, polishing machine, mop bucket, water press, mop;

2. Crystallization floor cleaning machine and water suction machine.